ETT has developed a new generation of rooftop units: ULTIMA. This Eurovent certified range is the fruit of many years of experience in Ecodesign and modular heat pumps production.
The ULTI+ EX is ERP2021 ready and combines energy efficiency and acoustic performance. It includes a new generation control system that ensures unit optimal operation at all times.
The modular design of the ULTIMA range allows you to adapt unit capacity to your needs. You may choose to install the standard ULTI+ heat pump, or to customise the packaged unit with additional modules such as an extraction module, creating an ULTI+ EX unit and adapting its performance to the environment and requirements of your application.
DescriptionAvailable optionsDownloads
The ULTI+ EX is covered by a 20-year guarantee against corrosion
The ULTI+ EX heat pump offers fully optimised air treatment.
Thanks to its full aluminium structure (frame & casing) which ensures an excellent corrosion protection, this air conditioning and heating system is covered by a 20-year guarantee against corrosion (frame and casing).
The EX extraction module helps avoid building overpressure. The ULTI+ EX unit allows precise management of the supply air and exhaust air in your building.
Without this extraction module, the building shall be equipped with an air exhaust system to complement the air conditioning unit.
This double flow rooftop heat pump with extraction box is delivered ready to operate and can be installed either on a rooftop or at ground level depending on your needs.
Thanks to its full aluminium structure (frame & casing), this unit is covered by a 20-year guarantee against corrosion (frame and casing).
The ULTI+ EX is a NEW GENERATION single flow heat pump designed to offer optimum air quality.
The ULTI+ EX unit operates as a reversible heat pump:
- Source: outside air
- Treated fluid: inside air
The unit offers several operating modes
- Heating
- Air conditioning
- Free Cooling: cooling with outside air, without thermodynamics
In those cases, the ULTI+ rooftop unit operates:
- With all recirculated air
- With all fresh air
- With mixed-air
The ULTI+ EX module offers several operating modes:
- Heating mode: In winter, comfort temperature is maintained thanks to the thermodynamic system and auxiliary heaters (optional).
- Cooling mode: In summer, comfort temperature is maintained thanks to the thermodynamic system.
- Free Cooling mode: In mid-season, comfort temperature is maintained using in priority the difference between outside air and inside air to cool the building.
Free Cooling allows considerable savings by delaying the use of thermodynamics.
The ETT packaged unit comprises 4 different sections:
- The external section allows thermal exchanges with the environment.
- The separate technical section houses the refrigeration components, the electrical board and the control components.
- The internal section ensures the air change and air treatment.
- The extraction section/module.
Frame – Casing
- Double skin in internal section
- Motorised external damper for supply air, except downwards (2006/42/EC Directive)
Acoustics
- Low Noise EC supply air fans
- Compressors acoustic jackets
Air handling
- Operation with all recirculated air (excluding Public Buildings)
- Operation with all fresh air
- Actuating smoke detector with battery back-up
- Epoxy coating for supply air fans
- Analogue air flow controller (AFC) with supply air fans flow rate auto-adjustment
- Pressure gauges for supply air filters
- Refillable 98 mm G4 filters for supply air with analogue probe
- 98 mm M5 filters for supply air with analogue probe
- G4 + F7 or F9 double filters (48 + 48 mm) for supply air with analogue probe
- 98 mm F7 filters for supply air with analogue probe
- 98 mm F9 filters for supply air with analogue probe
Thermodynamics
- ETT SRV control (variable cooling system)
- Cooling only operating mode (non-reversible unit)
- Compressor MAP monitoring
- Vinyl coating on thermodynamic coils
- Refrigerant leak detection aid
- HP and LP pressure gauge
Auxiliaries
- Recovery hot water coil with analogue frost protection thermostat
- Auxiliary hot water coil with analogue frost protection thermostat
- Progressive 3-way valve for hot water coil
- Stop valve on outlet + TA regulating valve on inlet for hot water coil
- Auxiliary 2-sequential stage electric heaters + Load shedding using dry contact
- Fresh air preheating through auxiliary 3-stage electric heaters
Electricity
- Total electrical energy metering according to 2002/91/EC
- Aluminium/copper connection terminal blocks (aluminium mandatory for power cables)
- 230V/16 A single-phase socket in the technical section (separate power supply to be provided by the installer)
- Phase checker
- IT earthing system compatibility
- Cable protective cowl for outside power supply (to be mounted by the installer)
Installation
- Aluminium adjustable connection roof curb
- Aluminium adaptation connection roof curb
- Aluminium adjustable ventilated roof curb
- Aluminium ventilated adaptation roof curb
- Aluminium plenum for return air and supply air
- 200 or 400 mm aluminium feet
Control
- Operation in year-round mode (compressor authorisation in Cooling mode with outside T° < +15°)
- Control function in Comfort mode (setpoint temperatures control by PID)
- Free Cooling banning based on specific humidity comparison
- VDP operation (power/flow rate variation)
- HPE+ operation (High Energy Performance)
- Dehumidification function level 1 (without heating capacity recovery)
- Dehumidification function level 2 (with heating capacity recovery & on/off refrigerating 3WV)
- Dehumidification function level 3 (with heating capacity recovery & analogue refrigerating 3WV)
- Average room temperature (4 probes)
- Minimum fresh air slaving using turret contacts (2 maximum)
Communication
- ETT MediaCom
- ETT TouchScreen remote touchscreen display
- Modbus RS485
- Modbus IP
- BACnet IP
- LonWorks
- Konnex